reflection free zone diagram in a recording studio room

What Is A Reflection Free Zone (RFZ) In A Recording Studio?

February 2, 2021

A reflection free zone (RFZ) is the area in your room around your listening position where no first reflection echoes will reach the listener. A RFZ is obtained by proper acoustic treatment of the first reflection points in your room.

One of the easiest ways to improve sound clarity in your recording studio is to treat your room's first reflections.

Treating first reflections is imperative because they are the most noticeable echoes and can seriously trick your ears! Not only are the first reflection echoes the most noticeable, but they can lead to further problems like comb filtering if left untreated!

Make life a little easier on your ears, and spend the time to learn how to create a RFZ for yourself!

In a professional mixing room or a home recording studio it is typical to have a two channel setup using a set of studio monitors. The main reflection points are on the back wall, side walls, ceiling and the front wall directly behind your monitors if they or not built into the wall.

In the below diagram you can see the reflection free zone in green.

diagram of reflection free zone RFZ in recording studio

As you can see there is acoustic absorption placed at the reflection points. The ceiling above the RFZ would be treated with absorption or diffusion. Also, the corners of the room will be treated with bass traps which offer low end absorption and help prevent standing waves in your room.

TRICK: The side wall reflection points can be found using the mirror trick! All you need is a small mirror. Sit in the listening position and have a friend move the mirror around on the side wall while you look into the mirror. When you can see your monitors in the mirror, that is a first reflection point!

Check out our recording studio treatment bundles HERE!

Another thing to note in the diagram is that the speakers form an equilateral triangle with the listening position (blue triangle in above diagram).

For best placement of your monitors use the 38% rule of thumb (created by by Wes Lachot). Measure the center point between the two side walls and 38% back from the front wall. This is the spot to start with, but does not have to be exact as all rooms are different.

Your right and left speakers should form an equilateral triangle with your listening position. Your monitors sound best when they are the same distance apart from each other as they are from you. Aiming your speakers at your listening point (toeing) can make a huge difference in the sound quality.

Monitor isolation pads are also used to angle speakers into more optimum listening positions. Speaker pads also help reduce vibration and absorb bass recoil providing you with the best sound your speaker can produce.

This concept is illustrated In the below diagram. The white dot is the listening position of the example room. The blue line is the same size as each red line.

best monitor placement for a recording studio

Now that you know how to properly place your monitors and treat your first reflections you are on the way to creating a recording studio for yourself! Time to rock out!!!

If you still have questions we are glad to help you!

Please contact us anytime!

Acoustic Treatment For Home Recording Studios - Multiple Design Ideas

What Is Transmission Loss Of Sound ?

What Is Noise Reduction Coefficient (NRC) ?

Acoustic Foam Room Calculator

Will Acoustic Foam Soundproof A Room ?

Acoustic Foam FAQ

How To Cut Acoustic Foam

Back to blog